Concrete Repair in Lawrenceburg, Pulaski & Southern Tennessee

Cracked driveways, spalling surfaces, heaving slabs — we assess the damage honestly and repair what can be repaired. Licensed & insured. Free estimates throughout southern Tennessee.

Get a Free Estimate

Concrete Repair Serving Lawrenceburg & Southern Tennessee

Concrete repair covers a wide range of work: filling cracks in a driveway, resurfacing a spalling slab, stabilizing heaving sections, or patching deteriorated edges. Not every damaged surface needs to be torn out and replaced. In many cases, targeted repairs extend the life of a driveway, patio, or slab significantly while costing a fraction of full replacement.

That said, repair isn’t always the right answer. If the underlying base has failed, if there’s extensive structural cracking throughout, or if the surface is too far gone, replacement gives you a better outcome long-term. When you call us for a concrete repair estimate in Lawrenceburg, Pulaski, or surrounding southern Tennessee communities, we assess the damage, explain what we’re seeing, and give you an honest recommendation either way.

We handle concrete repair for homeowners and businesses in Lawrenceburg, Pulaski, Ardmore, Minor Hill, and throughout Giles and Lawrence counties. See our dedicated concrete repair Lawrenceburg TN page for more local detail. Part of our full concrete services lineup.

Financing: Financing available for qualified projects (through our partner; subject to approval). See current specials.

Home improvement financing through our partner Hearth.

Explore financing options

Types of Concrete Damage We Repair

Concrete fails in different ways, and the right repair approach depends on what caused the damage and how far it has progressed. Here are the most common types of damage we address:

Cracks in driveways and slabs: Hairline cracks are often cosmetic, but wider cracks or cracks with vertical displacement indicate movement in the base. We clean, route, and fill cracks with flexible polyurethane or epoxy depending on width and location. Active cracks — those that continue to move — need a different approach than dormant ones.
Spalling surfaces: Spalling is when the top layer of concrete flakes, pits, or peels. It’s common on driveways that were finished poorly, sealed with the wrong product, or repeatedly treated with road salt. Mild spalling can often be addressed with a bonded concrete overlay or resurfacer. Severe spalling that has reached the aggregate layer typically calls for replacement.
Heaving and lifting: When a section of concrete lifts above the surrounding surface — usually due to tree roots, expansive soil, or frost — it creates a trip hazard and allows water to pool at the joint. Depending on the cause, we can grind the raised edge, remove the section, or address the underlying cause before repouring.
Sunken or settled sections: Sections that sink below grade often indicate that the base material washed away, was never compacted properly, or has eroded over time. We assess whether the section can be lifted (mudjacking or foam injection) or whether removal and repour with corrected base prep is the better long-term solution.
Surface scaling: Scaling is related to spalling but typically affects the very surface finish — often from deicing chemicals or poor curing on a new pour. A concrete resurfacer can restore the surface if the underlying concrete is still sound.
Edge and corner cracking: Corners and edges crack more easily because they have less support. We remove loose material, clean the area, and apply appropriate patch material with the right bonding agent to keep the repair from popping out.

Our Concrete Repair Process

Concrete repair done right requires more than just filling a crack and calling it done. The repair needs to bond to the existing concrete and address the reason the damage occurred, or it will fail again. Our process:

Assess the damage: We walk the surface, probe cracks, look for soft spots in the base, check drainage patterns, and identify the cause. A crack from settling is handled differently than one from tree root pressure or freeze-thaw expansion.
Determine the cause: Understanding why the concrete failed tells us what repair approach will last. If the base has washed out or was never right, patching the surface won’t hold. We address the root cause first.
Clean and prepare: We remove loose material, grind or route cracks to create clean edges, and clean the repair area. A concrete patch won’t bond to dirty or loose substrate — prep work is what makes the difference.
Fill, resurface, or lift: Depending on the damage type, we use crack filler, patching compound, concrete resurfacer, or we remove and repour the affected section. We use bonding agents where appropriate to maximize adhesion.
Seal and finish: A quality concrete sealer applied after repair protects the surface from moisture, UV, and freeze-thaw cycles. We match the finish to the surrounding surface where possible.

When Repair Makes Sense vs. Full Replacement

This is the most important question in concrete repair, and we’re straightforward about it. Repair makes sense when:

The damage is limited to specific areas and the rest of the surface is structurally sound
Cracks are dormant (not actively growing) and the base beneath is solid
Spalling or scaling affects the surface layer but hasn’t penetrated to the reinforcement
A single settled section can be stabilized without disturbing the rest

Replacement makes more sense when:

There is extensive cracking throughout the slab with multiple areas of vertical displacement
The base has failed underneath a large portion of the surface
The concrete is old enough that spalling and cracking are widespread — repair in one spot just shifts the problem
The cost of repair approaches the cost of replacement

We’ll give you that honest read when we come out. If repair is viable, we tell you. If it’s not, we explain why and give you a replacement quote as well. For full replacement, our concrete driveway installation and concrete slab installation pages cover what that process looks like.

Concrete Repair for Driveways, Patios & Slabs

Driveways take the most abuse — daily vehicle loads, fuel and oil drips, thermal expansion and contraction, and snow removal equipment in winter. Driveway crack repair and driveway resurfacing are among the most common jobs we handle in Lawrenceburg and Pulaski. Whether you have a single crack running across a section or widespread surface scaling from road salt, we assess and advise.

Concrete patios and porches have different stressors: they tend to crack at control joints or along forms, and they’re more likely to suffer from standing water and root pressure. Patio concrete that has cracked cleanly along a joint is often a good candidate for repair. Concrete that has buckled or heaved significantly usually isn’t.

Concrete slabs — garage floors, shop floors, equipment pads — develop cracks from point loading, base settlement, and shrinkage. Most functional cracks in a slab can be filled and sealed to prevent water infiltration and further damage. If a slab is used for heavy equipment and has cracked structurally, we discuss options for reinforced repour sections.

Whatever the surface, the process starts with an honest assessment. Call (931) 369-2134 or use the form on this page.

What Affects the Cost of Concrete Repair in Tennessee

Concrete repair costs vary based on the type and extent of damage, the repair method, and site conditions. Factors that affect price include:

Damage type: Crack filling is less labor-intensive than section removal and repour. Resurfacing a large area costs more than patching an isolated spot.
Extent of damage: A single 10-foot crack is a different job than a driveway with widespread spalling across 800 square feet.
Cause of damage: If the base needs to be corrected before repair, that adds to the scope. Root removal, drainage correction, or subgrade work all affect cost.
Access and site conditions: Tight spaces, slopes, or surfaces near landscaping or structures add complexity.
Finish matching: Matching a stamped or colored finish adds steps compared to standard gray repair.

We provide free written estimates so you know the full cost before any work starts. No surprise charges.

Frequently Asked Questions — Concrete Repair

How long does concrete crack repair last?

A properly done repair — where the crack is cleaned, routed, and filled with quality material, and the underlying cause is addressed — can last many years. The biggest factor is whether the cause of the crack was resolved. If a crack is still actively moving due to a live tree root or unstable base, the repair will eventually fail. Dormant cracks in a structurally sound slab, filled and sealed correctly, can hold indefinitely under normal conditions.

Can you resurface an old driveway instead of replacing it?

Yes, in many cases. Concrete resurfacing applies a thin bonded layer of new concrete mix over the existing surface, giving it a fresh appearance and renewed protection. The existing concrete needs to be structurally sound, not actively cracking, and free of significant spalling that has reached the aggregate. If the base has shifted or the slab is cracked through with displacement, resurfacing won’t hold. We’ll tell you whether your driveway is a good candidate when we assess it.

What causes concrete to crack in the first place?

There are several common causes: shrinkage during curing (especially if the concrete dried too fast or lacked control joints), base settlement from poor compaction or erosion, freeze-thaw cycles that expand water in pores, tree root pressure, heavy vehicle loads beyond what the slab was designed for, and age. In Tennessee, freeze-thaw is a factor, though less severe than in northern states. Poor initial construction — wrong mix, wrong base depth, no reinforcement — accelerates all of these.

How much does concrete repair cost in Tennessee?

The range is wide because the work varies so much. Crack filling for a single visible crack might cost relatively little; resurfacing an entire driveway or removing and repouring a section is a larger job. We provide free estimates specific to your situation — call (931) 369-2134 or use the form on this page and we’ll come take a look. We don’t quote off photos or square footage alone because the condition of the base and the extent of actual damage matter significantly.

Get Your Free Estimate Today

(931) 369-2134

Licensed & insured · Serving Lawrenceburg, Pulaski & Southern Tennessee

Prefer to Call?

(931) 369-2134

We're here to answer questions and schedule estimates.