Concrete Driveway Installation in Pulaski, TN

September 2025  ·  6 min read  ·  Advanced Construction Solutions, Minor Hill, TN

We serve Pulaski and all of Giles County from our base in Minor Hill. Pulaski is one of our most active markets for concrete driveway installation — the mix of in-town residential properties and rural Giles County acreage creates a diverse range of driveway projects, from standard residential strips to long rural approaches.

Permit requirements for driveways in Pulaski

The City of Pulaski requires a permit for driveway work that alters or modifies the curb cut on a city street. For residential properties along state highways outside the city limits, a TDOT driveway permit is required before any connection to the roadway. We handle both permit types as part of our project management.

Driveway considerations for Pulaski residential areas

Pulaski's residential neighborhoods — from the historic streets near downtown to the newer developments along Sam Davis Road and surrounding corridors — have different driveway needs. In-town properties often have established curb cuts and narrower lots, meaning the driveway scope is fairly defined. The most common project is replacing an aging asphalt or deteriorated concrete driveway with new concrete.

Rural Giles County properties present a different challenge — long driveway approaches off state roads that may run 100–400 feet before reaching the home. For these, we discuss gravel vs. concrete for the full run. A concrete approach for the first 30–50 feet from the road (the section most exposed to vehicle wear and water runoff) combined with gravel for the remainder is a cost-effective approach when budget is a constraint.

Soil and drainage in Pulaski

Giles County soils are varied. Some parts of Pulaski have good free-draining soil; others have expansive clay that needs careful management. We evaluate subgrade conditions during the site visit and always install a compacted gravel base before forming. Pulaski's terrain also means many properties have grade changes from the street to the garage — we manage transitions carefully so water drains properly and the driveway doesn't create a pond in front of the house after rain.

Cost ranges for driveways in Pulaski

• Standard two-car driveway (4 inches): $7,000–$15,000
• Long rural approach (per linear foot): $70–$115 per linear foot, 10 ft wide
• Demolition of existing asphalt or concrete: Add $1.50–$3 per sq ft
• Stamped or decorative finish: Add $8–$15 per sq ft

Call us at (931) 369-2134 or contact us online. See also our Pulaski concrete services page and our Pulaski driveways page.